EasyManua.ls Logo

Spectra Precision GL422N - Device Pairing Procedures; Pairing Remote to Transmitter; Pairing Receiver to Transmitter

Spectra Precision GL422N
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHARGING & BATTERIES (CONTINUED 4)
10
LL100N & HV101 (Alkaline Batteries)
The Spectra LL100N & Spectra HV101 are powered by 2 x 1.5v type “D” alkaline batteries
which will be pre-installed.
2 x 1.5v type “D” alkaline batteries will give around 50 hours of continuous use.
When required, open the bottom battery compartment and fi t 2 x 1.5v type “D” alkaline
replacement batteries, taking care to ensure correct polarity.
Type “D” alkaline batteries are readily available from all good hardware stores /
supermarkets. Although it is recommended you use a good brand of battery for best results.
It is also possible to use 2 x type “D” rechargeable batteries instead. However, as there is
no charging option for these lasers, the batteries would need to be manually removed and
charged in a stand-alone charger.

Other manuals for Spectra Precision GL422N

Related product manuals