Need help?Do you have a question about the Spectra Precision GL422N and is the answer not in the manual?
General| Type | Rotary Laser Level |
|---|---|
| Waterproof/Dustproof | IP66 |
| Accuracy | ±1.5 mm per 30 m (±1/16 inch per 100 ft) |
| Range (Diameter) | 2, 600 ft |
| Working Range with Detector | 2, 600 ft |
| Self-Leveling Range | ±5 degrees |
| Rotation Speed | 600 RPM |
| Laser Type | 635 nm, Class 2 |
| Power Source | Rechargeable Battery |
| Battery Life | 40 hours (Ni-MH) |
| Operating Temperature | -4°F to 122°F |
| Storage Temperature | -20°C to +70°C (-4°F to +158°F) |
Critical safety instructions for handling and operating the laser.
Instructions for powering the laser unit using batteries.
Procedure for installing NiMH rechargeable or alkaline batteries.
Steps and conditions for recharging the laser's battery pack.
Steps to establish communication between the remote control and the laser.
Steps to establish communication between the HL760 receiver and the laser.
Guidance on setting up the laser horizontally or vertically.
Setting grade values by stepping through increments.
Setting grade values by selecting and editing specific digits.
Procedure for automatically matching the laser to a desired grade.
Locking the laser beam to a fixed elevation point horizontally.
Locking the laser beam to a fixed alignment vertically.
Table of error codes and their respective solutions for troubleshooting.
Procedure to verify and calibrate the X and Y axes of the laser.
Procedure to verify and calibrate the vertical (Z) axis of the laser.
Key technical specifications for the laser unit.
To Next Page
