22
Setting Menu
Press and release the M button at the Standard Display and select >>Settings<<.
Press and release button E to open the Setting Menu; select the desired function then press button E to open
the selected submenu function OR start the selected function.
HI-alert Selection
Select HI Alert and press and release button E to open the HI-Alert menu.
The desired HI-alert: 5 min.(Default), 30 seconds and HI-off) can be selected using the Up/Down buttons.
Press and release button E to confirm the selected HI-alert.
Grade Entry
Select >>Grade Entry<< and press and release button E to open the Grade Entry menu.
Up/Down Buttons can be used to toggle between Digit Select and Step and Go .
Press and release button E to confirm the selection.
Grade Display
Select >>Grade Display<< and press and release button E to open the Grade Display
menu.
The desired Grade Display Mode (Percent/ Permille/Degree) can be selected using the Up/Down buttons.
Press and release button E to confirm the selected display mode.
To Next Page
Loading...
Need help?
General
