3
HOW TO INSTALL
Install refrigerator in a convenient location away from
extreme heat and cold. Allow sufficient clearance between
the refrigerator and sidewall so the door will open for a fully
usable interior. Refrigerator is not designed for recessed
installation.
Select a place with strong level floor.
Allow 5 inches of space between the refrigerator’s side and
the wall.
WHAT TO DO…
1. When out of operating for a long time:
Remove the power supply cord.
Dry your refrigerator opening the door for 2-3 days.
2. When you get ready to move:
Securely fasten removable interior parts (or move and package them separately).
Do not lay your refrigerator horizontally, or compressor may be damaged.
When you need service: Before you call for service, make sure you need it, check a few
things noted below for yourself first.
If refrigerator is not operating:
Is the power supply cord unplugged?
Is a home fuse blown or the circuit breaker off?
If refrigerator is warmer than usual:
Has the door been opened frequently or for a long period?
Is refrigerator overcrowded-preventing good air circulation?
Has a hot dish been stored without cooling?
Is there sufficient clearance between refrigerator’s side and the wall?
If there are unusual sounds:
Is refrigerator placed on a level surface?
Are foreign objects behind the refrigerator?
Are dishes on refrigerator shelves vibrating? If so, rearrange the dishes.
To Next Page
Loading...