English
3
Installing the OS
Language and
Applications
Important! Please keep the receiver on the docking station.
This is to make sure the battery will not go low during the
installation step.
• Insert the delivered SD card into the receiver’s SDIO card
reader [16] (see also SDIO Interface on page 11).
• Press the Power button [8] until the Power LED (next to
this button) lights up in green. This turns on the receiver.
When first turning on the receiver, screen [1] below is
displayed. Follow the procedure below to install a language
and then let the Microsoft Windows Embedded Handheld 6.5
Professional operating system install automatically
applications from the SD card. These applications are
required to run some Spectra Precision software applications
such as ProMark Field or MobileMapper Field. The complete
sequence takes about 4 minutes.
To Next Page
Loading...