T300
2 How to Operate
2.1 Turn On/ Off Procedure
. If the terminal is equipped with charging battery during first time use, please
connect the power adaptor and charge the battery for 3 hours.
. On - Power is on whenever plugged. If the terminal is unplugged, press the key
for several seconds to turn on the terminal. When the terminal displays the
application idle screen, it is ready for operation.
. Off - Disconnect the power adaptor. Keep on pressing the key for several
seconds to turn off the terminal.
2.2 Swipe Card & Insert Card
Installation Guide 6
To Next Page
Loading...