EasyManua.ls Logo

Spectracide ACCUSHOT User Manual

Spectracide ACCUSHOT
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
People and pets should not be allowed on treated areas until product has dried.
DIRECTIONS FOR USE
Before using, test surfaces to be treated for color fastness by applying to a hidden area. Wait 1
hour, then wipe with cloth. If color is removed from the test area, do not use Nature's Miracle®
Urine Destroyer on those surfaces. Do not use on untreated hardwood, leather, suede, silk or
wool specialty fabrics. Always use this product full strength. Do not dilute. Always use Nature's
Miracle Urine Destroyer products first. Other cleaners and detergents may fail and chemically
"set" stains that will be impossible to remove.
FOR STAIN REMOVAL
1. Wipe up as much of the stain as possible, then thoroughly soak stain with this product.
2. Allow to work for 10 minutes, then blot up stain with a clean cloth.
3. Allow area to dry for 24 hours.
4. For severe, old or stubborn stains an carpeting or fabrics (feces or vomit/hairball),
follow steps 1-2 above and follow with gently scrubbing the stain with a soft bristle brush
for 1 minute, then allow to dry for 24 hours.
FOR ODOR ELIMINATION
1. Wipe up excess odor-causing material, then thoroughly soak area with this product.
Saturation is important so that this product can penetrate deeply to the odor source. In
carpeting, this may mean lifting carpet and applying directly to the pad and floor.
2. Do not wipe up excess.
3. Leave treated area wet and let it air dry. Odor will fade as this product dries. Complete
odor elimination only happens when all odor sources are reached.
4. For severe, old or stubborn odors on carpeting or fabrics, saturate a towel with water and
lay over the treated area, letting sit for 1 to 2 hours. This will allow the bacterial
enzymatic activity to break down and consume more of the odor.
Question and Answer IconNeed help?

Do you have a question about the Spectracide ACCUSHOT and is the answer not in the manual?

Spectracide ACCUSHOT Specifications

General IconGeneral
BrandSpectracide
ModelACCUSHOT
CategoryPaint Sprayer
LanguageEnglish

Summary

Product Usage Directions

Stain Removal Instructions

Wipe, soak, blot, and dry steps for removing stains, with special instructions for severe stains.

Odor Elimination Instructions

Soak, let dry, and use damp towel methods for eliminating odors, especially stubborn ones.

AccuShot Sprayer Operation

Sprayer Setup and Use

Instructions for preparing and using the AccuShot sprayer, including aiming and trigger operation.

Sprayer Post-Use Procedures

Guidelines for closing the nozzle, securing the sprayer, and general maintenance after use.

Battery Replacement Guide

Steps for safely replacing batteries in the AccuShot sprayer, ensuring correct installation.

Additional Operating Notes

Important notes on sprayer care, including water submersion, hose inspection, and storage.