Need help?Do you have a question about the SpectRah ARV-77 Series and is the answer not in the manual?
Provides a general introduction to the ARV-7750/7760/77XX series A/D converter boards and their capabilities.
Lists the essential items that should be present in the package before operating the AD converter board.
Provides Spectrah Dynamics Inc. contact details including address, telephone, fax, website, and email.
Details how to set BIOS jumpers for various LCD panels to configure display timing and ensure correct BIOS settings.
Explains how to use jumpers to set the appropriate VDD for LCD panels, including voltage options and warnings.
Describes using jumpers to set the VDD for backlight controllers like inverters or LED driver boards, noting voltage requirements.
Details the selection between DC Voltage or PWM for controlling LCD brightness using jumpers JP710 and JP711.
Instructions for connecting the LVDS cable from the CN702 connector to the LCD panel.
Guides on connecting the backlight controller using a 7-pin inverter cable or powering it independently.
Instructions for connecting the OSD-470/482 touch pad and cable to connector CN802.
Details on connecting the power adapter to the system and the expected LED behavior upon powering on.
Specifies how to connect VGA, DVI-I, HDMI, and video cables to the board's input ports.
Instructions for powering on the computer and system, and troubleshooting display issues like dual screens.
Explains how to adjust OSD features like PIP, brightness, contrast, and auto-configuration for optimal panel display.
Describes the process of upgrading the board's firmware BIOS using Spectrah's programming tool via RS232.
Details on connecting external sensors like light or temperature sensors for auto light and temperature control features.
Details the 5 jumpers used to set appropriate BIOS for LCD panels and the procedure for changing display timing.
Explains how to select working voltage for LCD panel modules using jumpers JP702-JP705, including voltage options.
Details how to select working voltage for the backlight module using jumpers JP701, JP706, JP708, JP709.
Explains the use of jumpers JP710 and JP711 to select brightness control via DC voltage or PWM.
Provides the pin definition for the CN702 LVDS connector, supporting dual channels of LVDS panels.
Details the pin definition of the CN704 connector used for providing DC power to the backlight controller.
Provides the pin definition for the CN802 connector, used for plugging in the OSD cable and controller board.
Describes the three power input connectors (CN1001, CN1002, CN1003) for supplying VDD power to the board.
Details the pin definition for the CN202 DB-15 connector, used for RGB analog signal input.
Provides the pin definition for the CN301 DVI-I connector, offering PanelLink signal input.
Details the pin definition for the CN205 Mini Din S-Video connector for NTSC/PAL video sources.
Provides the pin definition for the CN204 RCA jack for composite video signal input.
Details the pin definition for the CN203 connector, supporting YPbPr, S-Video, and CVBS signals.
Describes the CN505 (output) and CN502 (input) connectors for audio signals, including five input channels.
Provides the pin definition for the CN801 connector, used for connecting remote sensors for OSD function control.
Details the pin definition for the CN304 HDMI connector, used for plugging in HDMI video cables.
Provides the pin definition for the CN901 port, used for upgrading firmware BIOS via RS232 interface.
Details the pin definition for the CN906 port, an I²C interface for external detection cards like sensors.
Explains the on-chip OSD controller, its interface menus, and how settings are saved in NVRAM.
Covers adjusting image parameters like Scheme, Black Level, Brightness, Contrast, Sharpness, and advanced options.
Details configuration options within the OSD setup menu, including Input Select and Factory Reset.
Explains how to adjust audio volume and select speaker output for main display or PIP.
Covers aspect ratio adjustments, including Full Screen, Pillar Box, and PIP mode configurations.
Details the ADC controller's features like scaling, PIP, and OSD, and the video decoder's capabilities.
Lists the available input ports for various signals (RGB, DVI, RCA, etc.) and the audio amplifier specifications.
Describes OSD capabilities such as auto setup, color enhancement, and image position adjustments.
Lists supported LCD panel resolutions and details the panel connection method via LVDS.
Explains image scaling capabilities and the board's compliance with VESA standards like DDC2B.
Details power adapter recommendations, board dimension, weight, and power consumption figures.
Provides specifications for operating and storage temperature and humidity ranges.
Guides users to the Spectrah website for drivers and specifications, and lists contact methods like dealer, fax, and email.
Specifies the essential information needed to report problems, including board details, system info, and program specifics.
Outlines usage restrictions for the manual content, copyright information, and disclaimers about specifications.
General| Brand | SpectRah |
|---|---|
| Model | ARV-77 Series |
| Category | Lighting Equipment |
| Language | English |
To Next Page