Need help?Do you have a question about the Spectral DMC-10 and is the answer not in the manual?
Introduction to the Spectral DMC-10 Preamplifier, highlighting its advanced design and high-performance components.
Instructions for connecting the power supply, initial checks, and proper placement for the DMC-10.
Details for Phono and Aux inputs, including cartridge types, impedance, and tape input connection.
Description of DC-coupled and AC-coupled main outputs and their compatibility with amplifiers.
Controls for selecting audio sources (Phono/Aux/Tape) and adjusting signal levels (Balance, Mute, Attenuation).
Control to combine both audio channels into a mono signal.
Indicators for power status and system protection monitoring.
Internal adjustments for phono loading and gain/balance for optimal performance.
Procedures for calibrating output offset voltage and bias using internal trim pots.
To Next Page
General