EasyManua.ls Logo

SpectraLink IP-DECT Server 400 - Page 9

SpectraLink IP-DECT Server 400
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Spectralink Servers and Base Stations Feature List
722-0211-000_A.docx
November 2020 9
Syslog
SNMP
SYSTEM ARCHITECTURE
The Spectralink IP-DECT Server 200 is both a radio unit and a SIP integration unit to
the host SIP Call Control / UC platform.
1 x Spectralink IP-DECT Server 200 and up to 3 x Spectralink DECT Repeaters (2 or
4 channel multi-cell)
12 wireless users/six simultaneous calls
SUPPORTED CODECS
G.711 A-law and μ-law
G.726 (32 kbps - 4 bit ADPCM)
G.729
NETWORK
10/100 Mbps Ethernet port
Manual or dynamic host configuration protocol (DHCP)
Time and date synchronization using Network Time Protocol (NTP)
LED status indication
PROVISIONING
Configuration
User data
Server firmware
Handset firmware
RADIO INTERFACE
RF output 20 to 24 dBm at antenna connection
Sensitivity: typical -90 dBm measured at antenna connection at BER = 0.001
Average transmit power: typical 5mW/ch (US) or 10mW/ch. (EU)
Peak transmit power: typical 125mW (US) or 250mW (EU)
Typical range:
Indoor: 20 - 50 m. (65 - 165 ft.)
Outdoor: 300 m. (1000 ft.)
Full slot DECT radio (12 channels)

Other manuals for SpectraLink IP-DECT Server 400

Related product manuals