SpectraPure MAXCAP RO/DI - User Manual

SpectraPure
SpectraPure®Inc. 480.894.5437 Call us toll-free 1.800.685.2783
2167 East Fifth St, Tempe, Arizona 85281
®
24
REPLACEMENT PARTS
Model Replacement Part
SF-MT-0.5-10 .5 micron MicroTec™ Sediment Filter
CF-0.5-10 .5 micron Carbon Block Pre-Filter
MEM-90,180 90 or180 gpd Membranes (2) 90gpd membranes
makes 180 GPD System
FR-90 Flow Restrictor for 90 gpd System
FR-180 Flow Restrictor for 180 gpd System
DI-MC-10
MAXCAP DI ™ Cartridge
DI-SB-10 SilicaBuster ™ DI Cartridge
GHA-4 1/4” (6.35 mm) Garden Hose Adapter
XWR-UNIV Filter Wrench
Optional Accessories
Model Optional Part
FAU-SMP Quick Connect Faucet Coupler
DS-4T Connects waste water to drain
LLC-S Fills a Single tank automatically
TK-CL-10 Total Chlorine Test Kit
VA-FVK-4 Flush Valve Kit
BPHF-MO-115 Hi-Flow Booster Pump, 115V
BPHF-MO-230 Hi-Flow Booster Pump, 230V
See our Catalog or our Web Site for Liquid Level
Controls and other Optional Accessories
REV 01-08-2007
Reverse Osmosis/Ion Exchange Water
Purification System
(Single-90 or Dual-180 Membrane Model)
The MAXCAP RO/DI™ System
INSTALLATION AND OPERATING
MANUAL
WARNING
Please read carefully before proceeding with installation. Failure to
follow any attached instructions or operating parameter may lead to
the product’s failure and possible damage to property.

Summary

Manufacturers Warranty

System Specifications

Membrane Performance Testing

Membrane Output Calculation

Formula for calculating GPD based on pressure and temperature.

Metering and Diagnostics

Using the Pressure Gauge

System Maintenance

Troubleshooting Guide

RO Membrane Rejection Rate Testing

Procedure to assess membrane performance by measuring rejection rates.

System Initialization

System Rinse-up Procedure

Steps for initial rinsing of cartridges before system operation.

RO Membrane Replacement

Concentrate to Purified Water Ratio Check

How to check and adjust water flow ratios for optimal membrane life.

DI Cartridge Maintenance and Replacement

Flow Restrictor Adjustment and Replacement

Flow Restrictor Procedure

SpectraPure MAXCAP RO/DI Specifications

General

Type	Reverse Osmosis / Deionization (RO/DI)
Production Rate	90 gallons per day (GPD)
Stages	5
Pre-Filters	5-micron sediment filter, carbon block filter
Typical Rejection Rate	98%
Maximum Feedwater Temperature	100°F (38°C)
Product Water TDS	0