To Next PageTo Next Page
Need help?Do you have a question about the Spectris Bruel & Kjaer Vibro AC-2114 and is the answer not in the manual?
Used to install electronic measurement equipment like VC-18xx series.
Lid has two hinges and can be locked with two screws for secure closure.
Can house power supplies, machine protection devices, and associated wiring.
Lists all items included with the housing, such as wall bracket, screws, and DIN rail.
Details IP rating, housing material (steel sheet), and blind plug material (plastic).
Specifies external paint color, weight, and operating ambient temperature range.
Provides detailed measurements and a drilling plan for mounting the housing.
Lists the types and quantities of cable glands (M6, M16, M32, M12, M20) and DIN rail.
Lists various cable glands (M12, M16, M32) and their order codes for secure cable entry.
Includes wall bracket and components for an M20 cable gland specifically for RJ45 connections.
Includes instructions for replacing blind plugs, avoiding vibration, and checking ambient temperature.
Describes options for mounting using provided screws or an optional wall bracket.
Details applying threadlocker and the sequence for fastening screws through metal walls.
Explains an alternative mounting approach where the screw head is inside the housing.
Covers attaching the wall bracket, using threadlocker, and securing the housing with specific parts.
Provides hole sizes (10mm), dowel insertion, and screw guidance for stone walls.
Details hole sizes (9mm), threadlocker use, and fastening for metal walls.
Specifies that the housing must be grounded if mounted on a conductive plate.
Emphasizes powering off, following instructions, and correct positioning of the housing.
Details reduced temperature range and the number of VC-18xx modules that can be installed.
Covers communication interface modules and required spacing between installed modules.
Recommends disconnecting Phoenix connectors and explains module removal from the DIN rail.
Covers configuring wiring, carefully applying cable shields, and connecting modules via Link-Concept.
Details establishing the connection between the AC-4111 power supply and VC-18xx modules.
Stresses checking wiring, securing modules to the DIN rail, and ensuring power is off.
Explains intercepting steel conduit and connecting cable screens to threads for optimal shielding.
Covers low-resistance housing grounding and ensuring the seal lip is tight when closing.
Provides clamping range details for rigid and flexible cables for the terminals.
Warning that disassembly must only be performed in an idle (power-off) state.
Information on WEEE compliance, avoiding household waste, and return options for the device.
States conformity with RoHS directive and lists applied harmonized standards like EN IEC 63000:2018.
Provides contact phone numbers, fax, and email for Brüel & Kjær Vibro in Germany, Denmark, and USA.
General