Spectron SP-A2100 User Manual

BEDIENUNGSANLEITUNG
OWNER’s MANUAL

Spectron SP-A2100 Specifications

General

Channels	2
RMS Power @ 4 Ohms	100W x 2
THD at RMS Power	<0.05%
Bass Boost	0dB
Total Harmonic Distortion	<0.05%

Summary

CONNECTIONS & CONTROLS

SP-A1500D Front Panel Controls

Details LEDs, input/output ports, and control potentiometers on the SP-A1500D front panel.

SP-A1500D Rear Panel Terminals

Details power input terminals, fuses, and speaker output terminals on the SP-A1500D rear panel.

SP-A2100 Front Panel Controls

Details LEDs, input/output ports, and control potentiometers on the SP-A2100 front panel.

SP-A2100 Rear Panel Terminals

Details power input terminals, fuses, and speaker output terminals on the SP-A2100 rear panel.

SP-A2200 Front Panel Controls

Details LEDs, input/output ports, and control potentiometers on the SP-A2200 front panel.

SP-A2200 Rear Panel Terminals

Details power input terminals, fuses, and speaker output terminals on the SP-A2200 rear panel.

SP-A4150 Front Panel Controls

Details RCA line inputs/outputs and control potentiometers for the SP-A4150 front panel.

SP-A4150 3/4-CH Controls

Details controls specific to the 3/4-channel section of the SP-A4150 front panel.

SP-A4150 Rear Panel Terminals

Details power input terminals, fuses, and speaker output terminals on the SP-A4150 rear panel.

GENERAL INFO ABOUT WIRES

Installation and Wiring Guidelines

Provides essential information on installing the amplifier, including power cable and RCA routing.

Minimum Speaker Impedance Load

Details minimum impedance load requirements for stereo and bridged modes to prevent damage.

AMPLIFIER MOUNTING

Mounting Location Recommendations

Offers guidance on selecting a suitable mounting location for optimal cooling and accessibility.

Mounting Procedure and Safety

Outlines the steps for mounting the amplifier, emphasizing safety precautions like disconnecting the battery.

CABLE ROUTING

RCA and Remote Wiring

Guides on routing RCA interconnects and remote leads separately from power cables.

Loudspeaker and Power Cable Routing

Provides instructions for routing loudspeaker wires and main power cables, including fuse placement.

ADJUSTMENT OF THE INTERNAL CROSSOVER

Operation Mode Selection

Explains how to set the operation mode (highpass, lowpass, fullrange) based on speaker system.

Highpass Crossover Frequency Adjustment

Guides on adjusting the highpass crossover frequency for satellite speakers.

Lowpass Crossover Frequency Adjustment

Guides on adjusting the lowpass crossover frequency for subwoofer systems.

Input Gain Control Adjustment

Details how to set input gain for optimal signal-to-noise ratio, including tone controls.

Subwoofer and Satellite Channel Gain

Explains how to set input gain for subwoofer and satellite channels for tonal balance.

Bass Boost and Subsonic Filter

Describes the Bass Boost/EQ function and the Subsonic Highpass filter for the SP-A1500D.

KEY DESIGN FEATURES

SP-A1500D Features

Lists key design features of the SP-A1500D, such as digital mono amplification and variable crossover.

SP-A2100 Features

Lists key design features of the SP-A2100, including two-channel operation and built-in crossovers.

SP-A2200 Features

Lists key design features of the SP-A2200, similar to SP-A2100.

SP-A4150 Features

Lists key design features of the SP-A4150, highlighting its four-channel capability.

TECHNICAL SPECIFICATIONS

SP-A1500D and SP-A2100 Specifications

Provides technical specifications for SP-A1500D and SP-A2100, including power output, impedance, and dimensions.

SP-A2200 and SP-A4150 Specifications

Provides technical specifications for SP-A2200 and SP-A4150, including power output, impedance, and dimensions.

LIMITED WARRANTY

Warranty Information and Limitations

Details the warranty period, service procedure, and limitations for the amplifier.