To install this SPECTRON amplifi er, you have to buy additional accessories like power cables, RCA
interconnects, main fuse holder, i.e. to properly connect your amplifi er to the on-board voltage system in
your vehicle and the installed head unit. To obtain best performance and power output, it is recommended
to use good quality accessory material only. Furthermore, consider a safe mounting of the amplifi er,
suffi cient ventilation and convenient accessibility of all the side panel controls a.s.o.
Please note that - because of possible interference problems with the existing car electrics and electronics -
the routing of the RCA signal cables and the chassis ground connection are crucial steps during the install of
this amp, and care must be applied to obtain a noise free and reliable performance.
INSTALLATION
35
To Next Page
Loading...