To Next PageTo Next Page
Need help?Do you have a question about the Spectrum Industries 37317 and is the answer not in the manual?
General| Brand | Spectrum Industries |
|---|---|
| Model | 37317 |
| Category | Indoor Furnishing |
| Language | English |
Read and comply with all safety and operating instructions, and ensure all parts and correct quantities are included.
Lists components like worksurface, table base, screws, and hook and loop straps with their part numbers.
Attaching leg mechanisms and release handle to the worksurface using screws and securing cables.
Attaching the legs to the leg mechanisms using hex screws and ensuring all screws are tightened securely.
Guide for installing optional wire management accessories like cord trays and leg channels.
Align cord tray with mounting holes and attach leg channel to leg using adjustment guides and tape.
Route power cord through worksurface cutout and secure module with thumbscrews.
Route power cords through the leg channel or use hook and loop straps to secure them to the leg.
Place Cove module into worksurface cutout and secure with thumbscrews.
Plug power cables into the Cove module and secure flexible metal conduit with cord clips.
Press and hold adjustment buttons on legs to raise or lower the worksurface to desired height.
Pull the release lever to lift the worksurface to a vertical position or lower it.
