EasyManua.ls Logo

SpeedLink SNAPPY - Intended Use; Safety Information; Disposal Information

SpeedLink SNAPPY
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
EN
INTENDED USE
This product is intended to be used as a USB hub for
connecting to a computer and is for indoor home/oce
use only. It contains no user-serviceable parts. Do not
disassemble it and stop using it immediately if damaged.
Jöllenbeck GmbH accepts no liability whatsoever for any
damage to this product or injuries caused due to careless or
improper use or for purposes for which it is not intended.
SAFETY INFORMATION
The device is still mains powered even if it is switched o.
To ensure it is fully disconnected from the power outlet and
mains supply, unplug the device. The power outlet should
be easily accessible and located close to the device so
the cable does not pose a tripping hazard. Do not expose
the device to any liquids as this can cause defects, electric
shocks or fire. Do not place vessels containing liquids (vases
or similar) or naked flames (candles or similar) on top of
or next to the device. Leave a 2cm gap around all sides of
the device to ensure sucient ventilation. Do not cover the
openings with objects or textiles (blankets or similar) and do
not insert any objects into the openings. Only use the device
where the ambient temperature is between 0 and 35°C. The
device label is on the back/base.
DISPOSAL INFORMATION
This symbol means that you must not dispose of this
product together with household waste. Always store
and dispose of old equipment or batteries correctly as
they can harm the environment or cause injury because they
may contain hazardous substances; failure to do so may
result in fines. In the EU, you can dispose of your old

Related product manuals