The Speedotron Plus•3
Protection Plan Service Contract
To apply, fill out this form completely, sign it, and mail it along with a copy of the bill of sale
and warranty registration card for each piece of equipment to be covered to:
Speedotron Corporation
310 South Racine Avenue
Chicago, Illinois 60607
Once approved, this form will be returned to you and a copy will be kept in Speedotron’s
files. Please note that if these instructions are not properly followed, you application will be
returned to you.
The Speedotron Plus•3 Protection Plan Price List
For Speedotron Black Line Power Supplies, 4800Ws $125.00
For Speedotron Black Line Power Supplies, 2400Ws 95.00
For Speedotron Black Line Power Supplies,1200Ws or lower 75.00
For Speedotron Force 10 / Force 5 75.00
For Speedotron Brown Line Power Supplies, 800Ws or higher 50.00
For Speedotron Brown Line Power Supplies, 600Ws or lower 30.00
For any Speedotron Black Line or Brown Line Light Unit
(not including flash tubes or modeling lamps) 10.00
NOTE: All pieces of equipment must be covered individually.
Customer name __________________________________________________________________
Address _________________________________________________________________________
City___________________State ______________________Zip ____________________________
Phone, ________________Daytime ___________________Evenings _______________________
Equipment covered.
Model ____________Serial Number ______________ Plus-3 price $ __________________
Model ____________Serial Number ______________ Plus-3 price $ __________________
Model ____________Serial Number ______________Plus-3 price $ ___________________
Model ____________ Serial Number _____________ Plus-3 price $ __________________
Total amount due for coverage on equipment listed above $ _______________________
Note: A copy of the bill of sale and warranty registration card must be included for
each piece of equipment listed above. The copy of the bill of sale must show the
authorized dealer’s name, invoice number and date purchased. Speedotron Plus-3
Protection Plan coverage must be applied for within 30 days of the date the
equipment was purchased.
The Speedotron Plus•3 Protection Plan
The Speedotron Plus•3 Protection Plan is an extended service contract that lets you
add 3 years of factory service coverage to the 2-year limited warranty that comes with
Speedotron power supplies and lights plan goes into effect the day your original warranty
expires, so you end up with 5 full years of coverage. With the Plus-3 Protection Plan,
virtually all your service needs will be taken care of free of charge. All Plus-3 Protection
Plan customers get priority service, so you can have the security of knowing that your
equipment will be back on the lob as quickly as possible. The Speedotron Plus-3
Protection Plan can only be purchased at the time you buy your equipment. Flash tubes,
modeling lamps and shipping charges are not covered.
Terms & Conditions
1. This agreement covers both labor and materials necessary for repairing equipment which is in need
of service because of faulty materials or workmanship or breakdowns from normal use, except as
hereinafter provided. Damage to equipment or its parts arising out of misuse, abuse, negligence,
shipping or causes beyond Speedotron’s control are not covered. In addition, this agreement shall
become void if the equipment covered is used for rental or is modified, altered, or serviced by persons
other than those authorized by Speedotron, or if it is used with parts, accessories, or equipment not
intended for use with Speedotron equipment
2. This agreement is between Speedotron Corporation and the person named in the contract. Thus,
payment for Plus-3 Protection Plan Coverage should be made directly to Speedotron (not to a dealer)
within 30 days of the date the equipment is purchased
3. Service under this agreement will be performed only at the Speedotron factory in Chicago. Service
performed at any other service station, including those authorized by Speedotron, is not covered and
any service so performed is at the customers expense. Shipping charges, both to and from the Chicago
factory, are also the responsibility of the customer, and are not covered by this agreement. Shipping
charges to cover the return of your equipment by what-ever means you choose may be included with
requests for service, or equipment can be returned C.O.D. (freight collect).
4. This agreement is valid only for the equipment listed Any other piece of equipment or accessory is
not covered under this agreement, even if damaged while in use with the equipment covered Flash
tubes and modeling lamps are not covered. In addition, once this agreement is signed by Speedotron,
no other equipment may be added to it. Should you purchase additional equipment and wish to have it
covered, you must purchase additional Speedotron Plus-3 Protection Plan Service Contracts.
$. The equipment listed in this contract will be covered only while owned by the person named in the
contract. THIS AGREEMENT IS NOT TRANSFERABLE.
6. Equipment covered by the Speedotron Plus-3 Protection Plan Service Contract will be given priority
service This priority service will be given during the regular warranty period of the equipment as well as
when the Plus-3 Plan goes into effect.
7. Other than the obligations set forth herein, Speedotron disclaims all warranties, expressed or
implied, including any implied warranties of merchantability, fitness for use, or fitness for a particular
purpose. Speedotron shall not be responsible for any direct incidental or consequential damages,
including but not limited to damages arising out of the use or performance of the equipment covered,
or the loss of use of the equipment covered.
8. This agreement shall be governed by and construed according to the laws of the state of Illinois, in
which Speedotron is located. It constitutes the entire agreement between parties and may not be
modified except in writing signed by duly authorized officials of Speedotron Corporation and the
customer.
9. This agreement shall terminate on the expiration date indicated, and any repairs necessary after
that date are solely the responsibility of the customer
10. Due to U.S. Customs Service regulations, this agreement only applies to equipment shipped within
the United States (including U.S. territories).
plus•3 protection plan
14
To Next Page
Loading...