What to do if the red reverse connection LED turns on with my Speedway Battery Charger?
If the red reverse connection LED turns on, it means the clamps are attached to the wrong battery terminals. Unplug the Speedway Battery Charger and reverse the connections.
Why won't my Speedway 07215 start?
If your Speedway Battery Charger will not start, check the following: 1. Make sure the cord is plugged in. 2. Check the power at the outlet. If the outlet is unpowered, turn off the charger and check the circuit breaker. If the breaker is tripped, ensure the circuit is the right capacity for the charger and has no other loads. 3. Unplug the charger and verify that the clamps are securely connected to the battery terminals.
What to do if the charge meter stays high for too long on my Speedway 07215 Battery Charger?
If the charge meter stays at the high end of the dial for more than 5-10 minutes, it indicates that the battery has a short circuit. Unplug the Speedway Battery Charger, discontinue use, and have the battery checked by a qualified technician.
Details the function of the charger's buttons, switches, and indicators.
Outlines recommended placement for the battery charger to ensure safety and efficiency.
Provides instructions for charging a vehicle's battery while it remains connected.
Step-by-step guide for charging a battery that has been disconnected from the vehicle.
General| Brand | Speedway |
|---|---|
| Model | 07215 |
| Category | Battery Charger |
| Language | English |
To Next Page