Spektrum DX Series - Stick Mode Change Instructions via Trim Programming

Spektrum DXs Transmitter
Stick Mode Change Guide
Stick Mode Change Instructions via Trim Programming
1. To enter trim programming mode, push and hold the Aileron and Rudder trim buttons outward
while you power ON the DXS transmitter.
2. 1 of the 4 Battery level indicator LEDs will light up Green. This indicates the current Stick Mode
selected
The LED will glow BLUE
when in Mode Change
programming mode
Press the A button to
save your selection. The
transmitter will power
down automatically
Mode 1
Mode 2 (default)
Mode 3
Mode 4
Use the Right Up
Trimmer to select your
desired Stick mode