What to do if Spektrum DX3C receiver goes into failsafe mode a short distance away from the transmitter?
If your Spektrum Remote Control receiver enters failsafe mode close to the transmitter: * Check the receiver antenna for damage; if it's cut or damaged, consider replacement. * Ensure the receiver antenna is properly positioned inside an antenna tube and extends above the vehicle.
How to fix Spektrum DX3C Remote Control if receiver loses its bind?
If your Spektrum Remote Control receiver loses its bind, it's possible the transmitter accidentally entered bind mode, ending the bind to the receiver. To resolve this, bind the transmitter to the receiver again.
Why is Spektrum Remote Control receiver taking longer than usual to link with transmitter?
If your Spektrum Remote Control receiver is taking longer than usual to link with the transmitter, it may be because the transmitter and receiver are operating on a Marine model. Marine receivers can take longer to link.
Why my Spektrum Remote Control system will not connect?
There are several reasons why your Spektrum Remote Control system might fail to connect: * The transmitter and receiver may be too close. Move them 8 to 12 feet (2.4 to 3.6m) apart. * Large metal objects might be interfering. Move away from vehicles or other large metal objects. * The selected model may not be bound. Ensure the correct model memory is selected and that the transmitter is bound to the model. * The transmitter may have accidentally entered bind mode. Rebind the transmitter and receiver.
What to do if Spektrum Remote Control receiver quits responding during operation?
If your Spektrum Remote Control receiver stops responding during operation, it could be due to: 1. Low battery voltage. Try completely recharging the battery. 2. Loose or damaged wires or connectors between the battery and receiver. Inspect the wires and connections, and repair or replace them as necessary.
General| Modulation | DSMR |
|---|---|
| Frequency | 2.4 GHz |
| Telemetry | No |
| Model Memory | 10 Models |
| Display | LCD |
| Type | 3-Channel Transmitter |
| Battery | 4 AA Alkaline |
To Next Page
