TV
User manual
Remote Control
Stand Screws
Batteries
Model no.: SP-LED40
1. TV Parts
R
USER’S GUIDE
Warranty Card
User’s Guide
2. Stand Assembly Instructions
Step 1
Place the TV faced down on a soft cloth or cushion to prevent the panel from being damaged.
Step 2
Align the screw holes on stand and TV bottom.
Step 3
Tighten the included screws with a screw driver.
NOTES:
- Unplug the power plug first when installing or removing the TV Stand.
- To avoid any damage to this TV, contact one or more partner for assistance when installing or removing the TV stand.
Your TV may be packaged with the Stand and the Cabinet separated. Before enjoying this TV,
please carry out the Stand Installation according to the instructions below.
1 2
3
To Next Page
