Spellbinders Glimmer - Letterpress Steps; Letterpress Application Process; Material Compatibility for Letterpress

Material Chart
Glimmer Thin Shim Glimmer Spacer Pad
Cutting Plate
(from Die-Cutting Machine)
Cardstock
Watercolor Paper
Chipboard
Fabric
Ribbon
Leather
STEPS TO LETTERPRESS
With Glimmer Hot Foil System
Ink the Glimmer Plate or
leave it not inked.
Add desired material
and the necessary Shims.
See Material chart below.
Remove the whole Platform and
sandwich and roll it slowly through
the Spellbinders
®
Platinum
™
Machine
or any other approved die-cutting
machine and back.
Remove Shims. Place the Platform
back in base. Enjoy the lovely
embossed image or letterpress
on your material.
Place Glimmer Plate on
the Platform.
DO NOT HEAT UP PLATFORM FOR LETTERPRESS
6
Visit our YouTube playlist for Glimmer Hot Foil System at https://goo.gl/YMKeFt