To Next PageTo Next Page
Need help?Do you have a question about the Spencer A and is the answer not in the manual?
General| Model | Spencer A |
|---|---|
| Power | 1200W |
| Dust Capacity | 2.5L |
| Filter Type | HEPA |
| Category | Upright Vacuum Cleaner |
Guidance for safely lifting and relocating the Industravac unit.
Instructions for protecting the machine during extended storage periods.
Guidance for placing the mobile unit on suitable surfaces for operation.
Site selection considerations for stationary unit installation.
Instructions for connecting the vacuum producer and its exhaust.
Steps to check the separator, door gasket, and filter bags.
Guidelines for electrical connections and safety precautions.
Procedure to verify correct motor rotation direction before operation.
Caution against operating the vacuum producer in surge for safety and to avoid damage.
Importance of using compatible Spencer equipment for optimal performance.
Routine lubrication points and frequency for machine components.
Maintenance instructions for the multistage centrifugal vacuum producer.
Step-by-step instructions for taking apart the vacuum producer.
Detailed steps for correctly reassembling the vacuum producer.
Procedure for shaking filter bags to remove accumulated dirt.
Instructions for safely removing and replacing the dirt can.
Instructions for changing door and dirt can gaskets.
Guide on how to properly install new filter bags.
Causes and corrective actions for air leaks in the separator.
Troubleshooting steps for low or no vacuum conditions.
Causes and solutions for dirt bypassing the separator.
Diagnosing and resolving issues with low vacuum or airflow.
Troubleshooting causes of external and internal machine noise.
Identifying and correcting common motor problems.
Troubleshooting reasons for machine vibration.
Diagnosing why the motor is overheating.
