What to do if temperature readings are too close together with Spengler Measuring Instruments?
To ensure accurate temperature readings with your Spengler Measuring Instruments, allow a minimum pause of 3~5 seconds between readings; a 15-second pause is recommended to allow the thermometer time to reboot.
How to fix Spengler Measuring Instruments showing temperature lower than 32°C?
If the screen on your Spengler Measuring Instruments displays a temperature lower than 32°C (89.6°F), press the 'Mode' button and set the reading to 'Body'.
General| Resolution (Air Velocity) | 0.1 m/s |
|---|---|
| Resolution (Temperature) | 0.1 °C |
| Data Hold Function | Yes |
| Max/Min/Average Values | Yes |
| Units | m/s, °C |
| Display | LCD |
| Auto Power Off | Yes |
Essential safety guidelines for using the thermometer.
Steps to take before operating the thermometer for accurate results.
Explains various temperature measurement techniques.
Step-by-step guide on using the thermometer.
Identifies and describes the basic components of the thermometer.
Information on alternative uses of the thermometer.
Detailed steps for operating the thermometer.
Procedure to recalibrate the device for accuracy.
Guide on how to replace the device's batteries.
Statement on electromagnetic compatibility.
Solutions for high temperature readings on the screen.
Solutions for low temperature readings on the screen.
Explanation for "HI" message display.
Explanation for "LO" message display.
To Next Page