Sper scientific 800036 User Manual

WBGT Heat Stress Meter
800036
Instruction Manual
- 28 -
Sper Scientific warrants this product against defects in
materials and workmanship for period of five (5) years
from the date of purchase and agrees to repair or replace
any defective unit without charge. If your model has since
been discontinued, an equivalent Sper Scientific product
will be substituted, if available. This warranty does not cov-
er probes, batteries, battery leakage, or damage
resulting from accident, tampering, misuse, or abuse of the
product. Opening the meter to expose its electronics will
void the warranty.
To obtain warranty service, ship the unit postage prepaid
to:
SPER SCIENTIFIC LTD.
8281 E. Evans Rd, Suite #103
Scottsdale, AZ 85260
The defective unit must be accompanied by a description
of the problem and your return address. Register your
product nline at www.sperscientific.com, or return your
warranty card within 10 days.
WARRANTY
Revised 10/14/2013

Sper scientific 800036 Specifications

General

Brand	Sper scientific
Model	800036
Category	Thermometer
Language	English

Summary

WARRANTY

INTRODUCTION

HEAT STRESS REFERENCES

OPTIONAL ACCESSORIES

FEATURES

SPECIFICATIONS

UNIT DESCRIPTION

KEYPAD

ERROR CODES

TROUBLESHOOTING

LCD DISPLAY

BATTERY REPLACEMENT

MEASUREMENT PROCEDURES

Display Mode Selection

How to cycle through RH, WBGT, TA, and TG measurement modes on the display.

Data Analysis

Connect meter to PC for data storage, analysis, and printing.

Heat Index Measurement

Procedure for taking Heat Index readings and protecting the sensor.

Non-Sleep Mode Selection

Overriding auto-off for continuous monitoring of the environment.

Alarm Threshold Selection

Adjusting audible alarm values for WBGT thresholds within a specified range.