Need help?Do you have a question about the Sperry instrument HSP5 and is the answer not in the manual?
General| DC Voltage Ranges | 200mV, 2V, 20V, 200V, 600V |
|---|---|
| AC Voltage Ranges | 200V, 600V |
| DC Current Ranges | 200µA, 2mA, 20mA, 200mA, 10A |
| Diode Test | Yes |
| Continuity Test | Yes |
| Overload Protection | Yes |
| Voltage Range (AC) | 200V, 600V |
| Voltage Range (DC) | 200mV, 2V, 20V, 200V, 600V |
| Current Range (DC) | 200µA, 2mA, 20mA, 200mA, 10A |
| Battery Type | 9V |
| Resistance Ranges | 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ |
| Resistance Range | 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ |
Details the functions and capabilities of the analog multimeter for various measurements.
Provides critical safety instructions and warnings for the proper and safe operation of the multimeter.
Details initial setup procedures, including test lead seating and mechanical zero adjustment.
Explains how to check and maintain the internal battery for accurate resistance and continuity tests.
Instructions for testing household batteries using the DC voltage measurement function.
Guidance on testing wall receptacles using AC voltage measurement, including proper grounding.
Procedure for testing extension cords for continuity using the Rx1K resistance setting.
Instructions for testing fuses for continuity using the multimeter.
Method for testing switches for continuity and proper operation.
To Next Page
