Ages 8 to
COLOR CODE
Power–blue
Input–pink
Output–green
Wire–orange
You always need a blue and a
green; pink and orange are
optional, in between.
REMOTE TRIGGER
The remote trigger lets you use a common remote
control with your modules. Make your littleBits
circuit and point your remote control at the remote
trigger’s sensor. Then, press any button on your
remote control to activate the module. The remote
trigger will work with almost any button on a
remote that uses infrared light to send signals.
MORE INFO littleBits.cc/Bits/remote-trigger
TRY THIS CIRCUIT
Start with a
blue power
module and
turn it on.
Press a button
on your remote
control.
Watch your
LED light up
from across
the room!
power LED
remote
trigger
To Next Page
Loading...
