Ages 8 to
COLOR CODE
Power–blue
Input–pink
Output–green
Wire–orange
You always need a blue and a
green; pink and orange are
optional, in between.
sound trigger
The sound trigger listens to the noise level in your
room, and sends an on signal when the loudness
goes over a certain threshold. You can make that
target level louder or softer using the included
screwdriver. We like to use it with an LED to light
up your room when you snap your ngers.
Start with a
blue power
module and
turn it on.
Make some
noise near the
sound trigger.
Watch your
green output
module turn on!
More info littleBits.cc/Bits/sound-trigger
try this circuit
try this circuit
power LED
sound
trigger
atst
r
To Next Page
Loading...
