Need help?Do you have a question about the SPI 14-415-4 and is the answer not in the manual?
Details traverse lengths for different cut-off values.
Details the general purpose probe specifications, including 0.0004"/10µm and 0.0002"/5µm radius options.
Details the traverse chisel probe, suitable for sharp edges, with a 0.0004"/10µm radius.
Details the parallel chisel probe for sharp edges, perpendicular to traverse, with a 0.0004"/10µm radius.
Guidelines for protecting and storing the tester when not in use.
Instructions for cleaning the tester unit and probe.
Guidance on contacting the service department for repairs.
Details traverse lengths for different cut-off values.
Details the general purpose probe specifications, including 0.0004"/10µm and 0.0002"/5µm radius options.
Details the traverse chisel probe, suitable for sharp edges, with a 0.0004"/10µm radius.
Details the parallel chisel probe for sharp edges, perpendicular to traverse, with a 0.0004"/10µm radius.
Guidelines for protecting and storing the tester when not in use.
Instructions for cleaning the tester unit and probe.
Guidance on contacting the service department for repairs.
General| Brand | SPI |
|---|---|
| Model | 14-415-4 |
| Category | Test Equipment |
| Language | English |
To Next Page
