Spid Elektronik MD-01 - User Manual

1
SPID Elektronik
User manual for controllers
MD-01 / MD-02 / MD-03
for firmware from version 2.0
27th October 2022

Summary

Controller Technical Specifications

Rotor Connection and Wiring

Azimuth & Elevation Motor Connection

Details specific pin assignments and wiring for Azimuth and Elevation motor connections.

Sensor Cable Connection

AZ;EL Sensor Cable Hookup

Details the connection diagram and best practices for sensor cable hookup.

Controller Operation Modes

SPEED CALIBR.

Controller Configuration

MOTOR CONFIGURATION

TEMPLATE Definitions

Defines various templates for connecting different motor types (AZ, EL, X/Y).

External Control Options

Motor Parameter Settings

STATE

Read-only parameter indicating if a motor is ON or OFF based on template selection.

TYPE

KIND

INPUT

CAN BUS Sensors Configuration

Rotation Angle Limits

MIN ANGLE

MAX ANGLE

Maximum Power Setting

RS232 Port Configuration

Virtual RS232 Port Configuration

Ethernet Port Configuration

Cable Connections Overview

HR Sensor Connection Details

ETHERNET MODULE v1 Installation

User Installation v1

ETHERNET MODULE v1 Configuration

ETHERNET MODULE v2 Installation

User Installation v2

ETHERNET MODULE v2 Configuration

CCM Module Installation (MD-01)

CCM Module Installation (MD-02)

CCM Module Installation (MD-03)

CCM Module Configuration

CCM Module Operation

Spid Elektronik MD-01 Specifications

General

Brand	Spid Elektronik
Model	MD-01
Category	DC Drives
Language	English