EasyManua.ls Logo

SPIERINGS AT6 User Manual

SPIERINGS AT6
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MANUAL SPIERINGS TRUCK AT6
AT6-EN-061031.doc
I
Preface
Dear user,
This operating manual provides the user of the Spierings folding crane with information concerning the crane's
construction and operation. You will find detailed technical specifications and maintenance instructions in the
maintenance part of this manual.
© Copyright Spierings Cranes.
All rights reserved.
No part of this publication may be reproduced or published, in any form or in any way, by print, photo print, microfilm or any other means without prior permission from the
manufacturer.
Question and Answer IconNeed help?

Do you have a question about the SPIERINGS AT6 and is the answer not in the manual?

SPIERINGS AT6 Specifications

General IconGeneral
BrandSPIERINGS
ModelAT6
CategoryConstruction Equipment
LanguageEnglish

Summary

Preface

Liability clause

Explanation of the symbols used

1. General data AT6

2. Operation

2.1. Getting to know the truck

Overview of the truck's components and features for familiarization.

2.2. Truck cab

Description of the truck cab interior, including seats, controls, and storage.

2.3. Control Panel

Detailed explanation and identification of all switches and indicators on the control panel.

2.4. Air-conditioning operation (Option)

Instructions on how to operate the optional air-conditioning system in the cabin.

2.5. Driving the Spierings crane

Procedures and precautions for driving the Spierings crane truck safely.

2.6. Shifting gear

Explanation of the automatic and manual gear shifting mechanisms.

2.7. Manual gear shift

Details on using the manual gear shift function and understanding display indications.

2.8. Brakes

Description of the truck's four braking systems and their operation.

2.9. Retarder/ESC/CC

Information on using the retarder, cruise control, and variable speed limit functions.

2.10. Driving off the road

Guidance on operating the truck in off-road conditions, including transfer case modes.

2.11. Parking

Steps for safely parking the truck, including engaging the parking brake.

2.12. Axle height adjustment

Instructions for adjusting the axle height for different operating modes and transport.

2.13. Independent rear axle steering

Explanation of the rear axle steering system and its modes, including crab steering.

2.14. Driving with erected crane

Refers to SK1265 manual for driving with an erected crane.

2.15. Driving with trailer

Procedure for connecting and towing a trailer with the truck.

2.16. Towing the crane

Guidelines for towing the crane when the diesel engine is running or out of order.

3. Maintenance

3.1. Safety

Essential safety rules and warnings to observe during maintenance operations.

3.2. Maintenance plan for the AT6 truck

A schedule outlining daily, weekly, monthly, and annual maintenance tasks for the truck.

4. Diesel engine

4.1. Maintenances at commencement of operations

Initial inspection requirements shortly after delivery and within months.

4.2. Access to the diesel engine

How to gain access to the diesel engine by removing cowling plates.

4.3. Engine oil

Procedures for checking, topping up, and changing the engine oil.

4.4. Oil filter engine

Instructions for replacing the engine oil filter and centrifugal filter.

4.5. Cooling

How to check and maintain the engine's cooling system, including coolant levels.

4.6. Air inlet system

Procedures for cleaning and replacing the air cleaner cartridge.

4.7. Fuel system

Instructions for replacing the fuel filter.

4.8. Fuel filter/water separator

Procedures for draining and replacing the fuel filter/water separator.

4.9. V-belts

Guidance on inspecting and adjusting the V-belts.

4.10. Exhaust system

Routine checks for the exhaust system.

4.11. Valve clearance check and adjustment

Steps for checking and adjusting engine valve clearance.

4.12. DEB-clearance check and adjustment

Procedures for checking and adjusting DEB-clearance on the engine.

5. Drive system

5.1. Transmission

Information on transmission maintenance, oil level checks, and oil changes.

5.2. Transfer case

Procedures for maintaining the transfer case, including oil level and changes.

5.3. Axles

Details on axle maintenance, oil levels, and oil changes for differentials and hubs.

5.4. Tyres

Guidelines for checking truck tyres and tyre pressure.

5.5. Check the brake linings

How to check the brake linings for wear.

6. Steering system

6.1. Rear axle steering

Explanation of the rear axle steering function, malfunctions, and checks.

6.2. Checking the steering system

How to check for play in the steering system components.

6.3. Align

Importance of wheel alignment and contact advice for electronic rear axle steering.

7. Electrical system

7.1. Lighting

Daily and annual checks for truck lighting systems.

7.2. Dashboard Lighting

Daily checks for dashboard lighting to ensure optimal safety.

7.3. Batteries

Procedures for checking, charging, and replacing the truck batteries.

8. Hydraulic system

8.1. Check the oil level in the hydraulic oil tank

How to check the hydraulic oil level in the tank.

8.2. Changing hydraulic oil

Procedure for changing the hydraulic oil, including oil analysis.

8.3. Replace hydraulic oil filter

Instructions for replacing the hydraulic fine filter and return filters.

8.4. Check the suspension accumulators

Annual check of suspension accumulators, requiring special tools.

8.5. Hoses and couplings hydraulic system

Regular checks for leaks and damage in hydraulic hoses and couplings.

9. Pneumatic system

9.1. Primary system: brake system

Explanation of the primary pneumatic system for the truck brakes.

9.2. Secondary system: accessories and transmission

Description of the secondary pneumatic circuit for accessories and transmission.

9.3. Air dryer

Information on the air dryer and filter replacement procedures.

9.4. Air vessels

Checking air vessels for condensation and air dryer element replacement.

9.5. Oil atomizer/water separator

Procedures for checking oil atomizer levels and draining water separators.

9.6. Check brake pressure

How to check brake pressure at various axles and system pressure.

9.7. Hoses and couplings pneumatic system

Checking pneumatic hoses, couplings, and components for leaks.

10. Lubrication

10.1. Central lubricating system

Checking the central lubricating system and its grease reservoir.

10.2. Manual lubrication

Guidance on manual lubrication points for outrigger beams, cardan shafts, and steering systems.

11. Miscellaneous

11.1. Check windscreen washer fluid

Weekly check of the windscreen washer fluid level.

11.2. Fire extinguisher

Annual check of the fire extinguisher by a certified authority.

11.3. Air-conditioning (Option)

Safety warnings and repair advice for the air-conditioning system.

12. Technical data

13. Enclosures

Related product manuals