To Next PageTo Next Page
Need help?Do you have a question about the Spin ATF 2 PROFI and is the answer not in the manual?
Details noise levels, operator training requirements, and proper disposal of packaging materials.
Guidelines for taking the machine out of service and disposing of its components according to regulations.
Step-by-step instructions for safely removing the lithium battery from the station.
Overview of the manual's purpose, machine features, and safety considerations.
Steps to ensure the station is ready for operation, including voltage checks and connections.
Explains the manual's objective: guiding operators in oil replacement for automatic transmissions.
Lists the main technical specifications, capabilities, and included features of the ATF2 machine.
Illustrates and identifies the main physical parts and components of the ATF2 machine.
Details the machine's control panel, including keyboard, display, pressure gauges, and flow meters.
Presents various sets of fittings and pipes for connecting different car models to the ATF2 station.
Lists and describes the three types of products used for the complete transmission treatment.
Instructions for filling the new oil tank and checking used oil levels in the station.
Steps for preparing and inserting the washing fluid into the station's dedicated tank.
Procedure for inserting the washing fluid into the transmission lubrication circuit.
Function to select and set the time for washing the automatic transmission.
Operation to remove old oil, including filter replacement and radiator cleaning steps.
Procedure for removing used oil from the converter and transmission, and replacing it.
How to add longevity additive to the circuit, similar to washing fluid insertion.
Steps to reset the circuit after oil colour is satisfactory and restore car connections.
Procedure to check the oil level after restoring connections before road testing.
Function to add oil to the car to reach the correct oil level.
Phase for bringing oil to temperature or verifying connection of fittings.
Function to unload the used oil tank inside the ATF.
Prints a report of the last performed operation, manual or automatic.
Configuration options for time, date, display, PC connectivity, and language.
Settings for oil viscosity, calibration tests, and pipe compensation.
Details risks of crushing injuries from machine tipping due to operator error.
Describes injuries from direct contact with live parts due to failure to switch off power.
Explains injury risks from indirect contact with live parts in unprotected outlets.
General| Vehicle Coverage | Universal |
|---|---|
| Fluid Identification | Automatic |
| Fluid Tanks | 2 |
| Fluid Compatibility | ATF, CVT, DCT |
| Operating Modes | Automatic, Manual |
| Display | LCD |
| Power Supply | 220V |
