EasyManua.ls Logo

Spinlock Deckvest LITE - Product Lifecycle and Care; Lifespan, Temperature, and Disinfection; Inspection Record; Storage, Cleaning, and Safety

Spinlock Deckvest LITE
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
109
60
30
140
22
60
30
140
22
60
30
140
22
60
30
140
22
60
30
140
22
LIFETIME = SHELF LIFE + USEFUL LIFE
After first use this product should last 5
years. Certain environmental elements will
considerably accelerate wear: salt, sand and
chemicals.
In exceptional circumstances, wear or damage
could occur on the first use which reduces the
lifetime of the product to that one, single use.
Shelf-life of this product in good condition is up
to 3 years before first use.
TEMPERATURE
Use this product only above a minimum of -30°
C and below a maximum of +60° C. When
the temperature is below freezing, even a fully
charged cylinder may not adequately inflate
your lifejacket. If this occurs use the oral tube to
manually top up your lifejacket after the CO
2
has
been discharged (and not before).
DISINFECTING THE PRODUCT
When necessary, use a disinfectant that
is compatible with polyamide, polyester,
polycarbonate, PVC etc.
Use diluted with clean water at a maximum
temperature of 30° C. After soaking for an hour,
rinse in clean cold water. Dry slowly, away from
direct heat.
RESPONSIBILITY
Spinlock is not responsible for the consequences,
direct, indirect or accidental, or any type of
damage befalling or resulting from the use of
its products.
Purchase date :
Date Approved
Date of first use :
Inspection Record
Temperature
Storage
Dangerous products
Cleaning / Disinfection
Drying
deckvestlite_and_+_3R679A_11.indd 10-11 14/10/2016 12:42

Other manuals for Spinlock Deckvest LITE

Related product manuals