SPINNAKER CROFT User Manual

AUTOMATIC
This timepiece is equipped with
a self-winding Mechanical
Automatic movement.
It does not need a battery.
It is powered by the motions of
the user’s own wrist during
the wear of the watch.
You may also choose to wind
the watch manually.
For more details on operating
this timepiece please refer to
the enclosed booklet or visit:
spinnaker-watches.com
Vol. 1.100 EN
Instruction Manual

SPINNAKER CROFT Specifications

General

Case Material	Stainless Steel
Crystal	Sapphire
Strap Material	Leather
Strap Width	22mm
Movement	Automatic

Summary

Screw-down Crown Operation

Importance for Water Resistance

Explains the function of the screw-down crown to ensure water resistance and the need for secure closing.

Watch Winding and Powering

Manual Winding Procedure

Step-by-step guide on manually winding the automatic watch mainspring to start its movement.

Daily Wearing for Winding

Instructions on wearing the watch daily for at least 8 hours to ensure it is fully wound by movement.

Setting Time and Date

How to Set the Time

Step-by-step instructions for setting the correct time on the watch.

How to Set the Date

Step-by-step instructions for setting the correct date on the watch.

Date Setting Precautions

Warning about the specific hours when the date should not be set to avoid damage.

Water Resistance Guidelines

Understanding Water Resistance Ratings

Explains the water resistance chart as a guide and factors affecting its actual performance.

Precautions for Water Exposure

Advises against wearing the watch in hot tubs, steam rooms, or hot showers due to condensation risk.

Water Resistance Chart

A chart detailing the watch's suitability for various water activities at different depth ratings.