SPINZALL BDX SP-501 - Table of Contents; Whats in the Box

2
TABLE OF CONTENTS
WHAT’S IN THE BOX
1 Assembled Spinzall centrifuge consisting of:
1 Motor Base with assembled Pump, Pump Inner-Tube Assembly, and Bowl Gasket
1 Bowl
1 Lid Assembly with silicone rubber Chute Extender
1 Lid Cap (with silicone rubber Gasket installed)
1 Rotor with 3 installed Fins
1 Feeder Assembly (1 Feeder Base, 1 Feeder Gasket, 1 Feeder Lid, 3 silicone rubber
Feeder Extenders)
1 90 cm long/4mm inner diameter/8mm outer diameter silicone rubber Pump Inlet Tube
1 42 cm long/4mm inner diameter/8mm outer diameter silicone rubber Pump Outlet Tube
1 User Manual and Recipe Book
1 Limited Warranty
1 Spinzall Cheat Sheet
Extras (Spares): 3 Rotor Fins, 3 Tube Extenders, 1 Feeder Gasket,1 Pump Inner-Tube Assembly
What’s In the Box
Introduction
Expectations
Important Safety Instructions
The Parts Of Your Spinzall
Spinzall Safety Mechanisms
Before First Use
Taking Your Spinzall Apart
How To Run Your Spinzall In Batch Mode
How To Run Your Spinzall In Continuous Mode
After The Spin: Opening And Cleaning Your Spinzall
How Continuous Mode Works: Feeder Magic
How To Open A Locked Spinzall With No Power
How To Replace The Pump Inner Tube Assembly
Troubleshooting Your Spinzall
Recipes
Where to Go for More Recipes
Electrical Specifi cations
2
3
3
4-5
6-7
8
8
9-10
10-13
13-14
15-16
16-17
17-18
18
19
20-29
30
30