What to do if my Spirit Fires Indoor Fireplace burner lights but turns off after a few minutes?
If the burner on your Spirit Fires Indoor Fireplace lights but turns off after a few minutes, verify that the gas pressure is strong enough and remains constant. Also, check for chimney draw or downdraft that might be extinguishing the pilot light, and ensure the ventilation isn't too strong.
Why is my Spirit Fires Indoor Fireplace appliance sparking but not lighting the pilot?
If your Spirit Fires Indoor Fireplace is sparking but the pilot isn't lighting, verify that the spark is strong and that the ignition lead is properly connected. You can also check for gas flow by using a match. Additionally, ensure there's no air in the gas line by purging the system.
What to do if my Spirit Fires Indoor Fireplace pilot lights but does not light the main burner?
If the pilot light on your Spirit Fires Indoor Fireplace ignites but the main burner doesn't, check that the pilot flame is adequately heating the thermocouple and that the thermocouple is functioning correctly. Also, ensure that the gas pressure is sufficient.
What to do if my Spirit Fires Indoor Fireplace clicks but there is no spark?
If your Spirit Fires Indoor Fireplace clicks but produces no spark or a weak spark, check that the spark lead is properly connected. Additionally, verify that the spark electrode is positioned correctly and that the gap is correctly distanced to the pilot.
What to do if my Spirit Fires Indoor Fireplace shuts down unexpectedly?
If your Spirit Fires Indoor Fireplace shuts down unexpectedly, review the installation conditions and have the installation checked by a gas safe engineer.
What to check if there is no gas and my Spirit Fires Indoor Fireplace does not light with a match?
If there is no gas and your Spirit Fires Indoor Fireplace does not light with a match, check that the isolation tap/shut off is open. Also, inspect the gas pipes for any blockages.
What to do if there is gas but the pilot does not light on my Spirit Fires Indoor Fireplace?
If there is gas but the pilot light on your Spirit Fires Indoor Fireplace doesn't ignite, check for a strong spark and ensure the ignition lead is connected. Additionally, verify that the pilot gas slot is clear.
Details on how the appliance's efficiency was measured and certified.
Procedure for checking gas pressure to ensure safe and reliable operation.
Test to ensure safe operation by checking combustion product flow into the flue.
Final steps including customer handover, maintenance advice, and warranty.
Common symptoms, possible causes, and solutions for fire operation issues.
General| Model | FR920HE |
|---|---|
| Category | Indoor Fireplace |
| Fuel Type | Electric |
| Material | Metal, Glass |
| Voltage | 120V |
| Adjustable Thermostat | Yes |
| Remote Control | Yes |
| Overheat Protection | Yes |
To Next Page
