EASY ASSEMBLY AND OPERATION INSTRUCTIONS
01257732 Twitching Banshee
This item, when assembled by the following instructions,
should take 15 minutes to assemble. Please follow the step
by step guide and enjoy your Twitching Banshee!
STEP 1
STEP 2
PROCEED TO PAGE 2 > >1/3
PARTS LIST
A. Base
B. Support Poles x 4
C. Costume
D. Torso Frame
E. Hip Hoop
F. Upper Torso Frame
G. Head
H Left Arm
I. Right Arm
UL Adapter *
* UL Power Adapter Spec
Input: 100 - 240VAC 50/60Hz
Output: 5.9V 1A
CARE AND STORAGE INSTRUCTIONS
For best performance operate your item indoors or in a sheltered outdoor area.
We also recommend that you bring your item indoors duri
ng adverse weather
(extreme cold, strong winds and/or rain). When not in use, store this product
in it’s original packaging. Keep away from heat and moisture.
A
F G H I
NOTE: The longer end of the (A) Base goes towards the front. First, assemble the (B) Support
Poles to each other and to the (A) Base as shown, and secure by aligning the quick-connect
push buttons into the pre-drilled holes.
NOTE: The (C) Costume opens/closes at the back.
Next, lower the (C) Costume over the (B) Support Poles through the bottom & out through the
neck opening of the (C) Costume.
WARNING
This item is not a toy and should be used for decoration only. This item contains small parts that can be a
choking hazard. Keep all plastic and wire parts away from children. This product is intended for people
ages 14 and up.
1. Please use the applicable transformer or the one supplied by manufacturer。
2. Please install the product according to the instruction, the connecting wire should be connected in the
correct color
3. Children should be supervised by adults when using the product and keep the transformer away from
kids。
4. The transformer should be inspected regularly。
Please read all instructions carefully before assembling. Save this instruction sheet for future reference
B C D E
1
2
3
C
B B
B
B B
A
B
B
B
To Next Page
Need help?
General