To Next PageTo Next Page
Need help?Do you have a question about the Spirit TLS1850 and is the answer not in the manual?
General| Brand | Spirit |
|---|---|
| Model | TLS1850 |
| Category | Water Pump |
| Language | English |
Always disconnect electricity supply before handling, maintaining, repairing, or installing pond equipment.
Always ensure you know the correct amps and voltage required before installing the pump.
Use a dedicated power outlet only to prevent overheating and fire risk from shared outlets.
Always connect to a GFCI and never submerge the power cable plug in water for shock prevention.
Never let the pump run without water; it must stay submerged to prevent overheating and failure.
Product is for fresh water only; do not use in bathrooms or swimming pools.
All electrical work must be performed by a qualified technician following all applicable codes.
Never use extension cords; power cords must not be bent, twisted, abraded, or cut.
Motor has protection against overheating due to load or low water, with auto-reset after cooling.
Do not start operation with people standing near intake or outlet; never operate out of water.
Use only for circulation of water with limited solids up to 1/4"; do not pump oil or chemicals.
Do not allow foreign objects to clog intake; turn off power during outage to prevent restart damage.
Disconnect all power supplies before inspection or service to avoid possible electrical shock.
Remove, clean, and check pump for damage regularly to prolong its life and maintain flow.
Wash and dry pump, store indoors in non-freezing location; prevent freezing if left in water.
Check power cord connection, float movement, circuit breaker, and pump cord contact.
Check for clogged suction, worn impeller, high head, or low water level.
May indicate damaged power cord, improper grounding, or overloaded circuit.
Check for low water conditions, pump overheating, clogged inlet/impeller, or improper power supply.
Check water density, clear impeller obstructions, verify power supply, or wait for cooling.
Graph showing pump head (ft) versus capacity (GPM) for different models.
Details maximum GPH, HP, Watts, and Head for TLS1850, TLS2750, and TLS4250 models.
18-month warranty against mechanical/material defects for properly installed products from authorized sellers.
Warranty excludes accidental damage, normal wear, improper use, or modifications.
Obtain RA number, include original receipt, and pay return shipping charges for claims.
EasyPro not liable for consequential damages, loss of livestock, or other indirect losses.
