SPIRITUS SYSTEMS THE THING 2

Need help?

Do you have a question about the SPIRITUS SYSTEMS THE THING 2 and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features
General Safety Warnings

The SPIRITUS SYSTEMS THE THING 2 is a versatile modular load carriage system designed to expand the operator's ability to carry equipment. It is available in commercial markets and offers various configurations to suit different operational needs.

Function Description

The Thing 2 serves as a base platform for attaching a variety of pouches and accessories, allowing operators to customize their loadout. Its primary function is to provide a flexible and adaptable solution for carrying radios, magazines, and other essential gear. The system is designed to integrate seamlessly with placards or micro fight chassis, as well as subload pouches, offering a comprehensive approach to load management.

Important Technical Specifications

The Thing 2 is built to support any molle pouch that has a weave width of three columns. This specification ensures compatibility with a wide range of existing MOLLE-compatible gear. The system allows for the use of 2 x 3 column MOLLE pouches, which are commonly used for radios and additional magazines. The Thing 2 can also accommodate subload pouches such as the SACK pouch or Lunchbox pouch, further expanding its carrying capacity.

The device is designed, tested, and manufactured in THE USA. CAGE CODE: 813G6 DUNS: 08-185-0461 ADDRESS: 112 BUD PLACE, ABERDEEN, NC 28315 WEBSITE: SPIRITUSSYSTEMS.COM

Usage Features

The Thing 2 offers several usage features that enhance its adaptability and ease of use:

Radio/Magazine Retainer Assembly: The assembly process for the radio/magazine retainer involves several steps to ensure secure attachment.

Step 1: The package includes 2 pieces of Shock Cord, 2 x Pull Tabs, and two Cord Locks.
Step 2: Begin assembly by running the shock cord through the tab as shown.
Step 3: Once the shock cord has been run through the tab in Step 2, pull the running ends through one of the pull tabs.
Step 4: Once you have completed Step Three, take the two running ends of the shock cord and run them in between the soft pouch material and the black plastic insert as shown. Finally, feed the running ends through the provided cord lock.
Step 5: Secure the running ends of the shock cord with an overhand knot.

Alternative Method for Retainer Assembly: There are three alternative methods for assembling the retainer:

Alt Method-Step 1: Run each running end through each eyelet as shown.
Alt Method-Step 2: Feed both running ends into the provided cord lock.
Alt Method-Step 3: Finally, secure the running ends of the shock cord with an overhand knot.

Attaching a MOLLE Pouch: The Thing 2 is built to support any MOLLE pouch that has a weave width of three columns.

Step 1: Start by placing your pouches' MOLLE tabs over the highest point on the panel. Then, begin weaving the tabs through the MOLLE webbing on the pouch.
Step 2: Continue to weave the tabs through the panel and the MOLLE webbing on the pouch until the pouch is completely secured. DO NOT skip MOLLE sections.

Attaching a Placard or Micro Fight Chassis: The Thing Two was built to expand the capability of Placards that already exist on the market. It uses a combination of webbing passthroughs and Velcro to secure items to it.

Step 1: Weave the buckles on the Placard or Micro Fight Chassis through the retaining loops on The Thing 2 as shown in the figure above.
Step 2: Once both buckles have been fed through the retaining loops, securely mate the Velcro on the Placard or Micro Fight Chassis to the Velcro Loop Field on The Thing Two.

Attaching a Subload Pouch:

Step 1: Begin by separating the loop/hook Velcro field inside the pocket on the rear of The Thing 2.
Step 2: Insert the Velcro tongue on your subload pouch into the pocket.

Maintenance Features

The manual provides important warnings regarding the maintenance and care of the device:

DO NOT machine wash or dry clean the product. Using harsh detergents, bleach, or solvents may damage the product's construction and compromise the product.
Inspect the product for damage, such as rips, tears, abrasions, or cracks before and after each use.
DO NOT expose the product to direct flame or excessive heat.
DO NOT alter the product in any way.

These guidelines are crucial for ensuring the longevity and proper functioning of the Thing 2. Regular inspection helps identify potential issues early, preventing further damage and maintaining the product's integrity. Avoiding harsh cleaning methods and extreme conditions is essential for preserving the materials and construction of the device. Any alterations to the product are discouraged as they may compromise its intended design and performance.

General Safety Warnings

The manual emphasizes the importance of reading and understanding all instructions prior to installing or using the product. The following are general safety warnings that must be followed to prevent serious injury or death:

WARNING: Failure to follow instructions could lead to product damage, product failure, and/or serious injury or death.
Read all general safety warnings on page one of this operator's manual. The warnings in this manual are intended to call attention to fundamental performance limitations and areas of the product where proper usage must be followed.

These warnings highlight the critical need for users to be fully informed about the product's capabilities and limitations to ensure safe and effective operation.