SPIRIVA Respimat re-usable - Prepare for use; Remove Clear Base and Insert Cartridge

This information has been created by Boehringer Ingelheim and is intended for healthcare professionals in the UK.
NP-UK-100852 v1 Date of preparation: September 2019
When the patient has used an inhaler with 6 cartridges, get a new Respimat® re-usable pack
containing an inhaler.
Prepare for use
1. Remove clear base
• Keep the cap closed.
• Press the safety catch while pulling off
the clear base with the other hand.
2. Insert cartridge
• Insert the cartridge into the inhaler.
• Place the inhaler on a firm surface
and push down firmly until it clicks
into place.