This information has been created by Boehringer Ingelheim and is intended for healthcare professionals in the UK.
NP-UK-100852 v1 Date of preparation: September 2019
3. Track cartridge
• Mark the check-box on inhaler’s label
to track the number of cartridges.
• Put the clear base back into place
until it clicks.
4. Turn
• Keep the cap closed.
• Turn the clear base in the direction of
the arrows on the label until it clicks
(half a turn).
5. Open
• Open the cap until it snaps fully open.
6. Press
• Point the inhaler toward the ground.
• Press the dose-release button.
• Close the cap.
• Repeat steps 4-6 until a cloud is
visible.
• After a cloud is visible, repeat steps 4-
6 three more times.
The inhaler is now ready to use and will
deliver 60 puffs (30 doses).
To Next Page
Loading...
