Need help?Do you have a question about the SPL Dynamics ICE-150.2 and is the answer not in the manual?
High power audio systems can cause hearing loss or impair driving ability.
Proper mounting ensures heat dissipation and optimal performance.
Connect speakers with correct polarity using minimum AWG 15# cable.
Connect the +12V power cable with an in-line fuse near the battery terminal.
Connect remote cable to source unit for automatic on/off switching.
Connect chassis ground cable tightly to a massive, conductive point.
Adjust gain to match source unit output, avoid distortion for clear sound.
Use car audio RCA cables for inputs; use Y-RCA or HIGH-LOW adaptors if needed.
Controls Low Pass, High Pass, or Full frequency modes for driving different speaker types.
Buffered output signal for daisy chain amplifier installation.
LED indicates proper operation; flashes or shuts down on self-testing or malfunction.
LED indicates fault detection (heat, polarity, short, overload) requiring shutdown.
Switch selects 2-channel or 4-channel input mode for the ICE-150.4.
Protect amplifier; never replace with higher amp fuse or burnt fuse without checking.
General| Brand | SPL Dynamics |
|---|---|
| Model | ICE-150.2 |
| Category | Car Amplifier |
| Language | English |
To Next Page
