NOTICE :
• DUE TO VARIABLE FACTORS, POWER RATING MARGIN OF ERROR ± 10%
IS ALLOWED.
• ALL POWER RATINGS ARE TESTED AT 14.4VDC
• WHEN VEHICLE’S ENGINE IS STOPPED ITS BATTERY’S VOLTAGE DROPS
NORMALLY LOWERING RATING INDICATED WITH THIS UNIT.
• WE FOLLOW A POLICY OF CONTINUOUS PRODUCT IMPROVEMENTS AND
MODIFICATIONS. DUE TO THIS REASON SPECIFICATIONS, WARRANTIES,
FEATURES, PRICES, CONFIGURATIONS AND AVAILABILITIES ARE WITH NO
GUARANTY AND SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
www.spldynamics.fi
R
SPECIFICATION
Total Channel @ 1 Ohms
85W x 4CH
60W x 4CH
0.2%
10Hz-20KHz
50Hz-4KHz
15Hz-600Hz
150Hz-6KHz
0.2mV-6V
20K Ohms
40A x 1
170x53x198mm
300W x 4CH
200W x 4CH
600W x 2CH
0.2%
10Hz-20KHz
50Hz-4KHz
15Hz-600Hz
150Hz-6KHz
0.2mV-6V
20K Ohms
35A x 3
170x53x312mm
600W x 2CH
400W x 2CH
1150W x 1CH
0.2%
10Hz-20KHz
50Hz-4KHz
15Hz-600Hz
150Hz-6KHz
0.2mV-6V
20K Ohms
35A x 3
170x53x312mm
420W x 1CH
300W x 1CH 600W x 1CH
610W x 1CH
0.2%
10Hz-160KHz
17Hz-50Hz
0-180 Degree
40Hz-180Hz
150mV-6V
20K Ohms
30A x 2
170x53x282mm
1000W x 1CH
1600W x 1CH
0.2%
10Hz-160KHz
17Hz-50Hz
0-180 Degree
40Hz-180Hz
150mV-6V
20K Ohms
20K Ohms 20K Ohms 20K Ohms 20K Ohms 20K Ohms
170x53x392mm
Total Channel @ 2 Ohms
Total Channel @ 4 Ohms
THD @ 1 Ohms
170W x 2CHBridge Power @ 4 Ohms
Frequancy Respones ± 1.0dB
55dB 55dB 55dBChannel Separation
Subsonic Filter
Phase Control
LPF: Low Pass Filter
HPF: High Pass Filter(x1)
HPF: High Pass Filter(x10)
Adjustment Sensitivity Range
Input Impedance
Low Level
Fuse
Dimensions (W x H x D)mm
MD-60.4 MD-200.4 MD-400.2 MD-600.1 MD-1500.1
15
To Previous Page
Loading...