S+S GLS 350/150 GENIUS+ - User Manual

Operating Instructions
Metal detector
GLS
We reserve the right to change the con-
tents due to product innovation or tech-
nical improvement.
Please state type of equipment and se-
rial number when contacting us.
Please read these instructions and keep
the manual safe!
Please observe and follow the safety
notes!
S+S Separation and Sorting Technology GmbH
Regener Straße 130 * D-94513 Schönberg
Telephone: +49 8554 308-0 * Fax: +49 8554 2606
E-mail: info@se-so-tec.com
Internet: http://www.se-so-tec.com
Service: Telephone: +49 8554 308-180
1 GLSII-BA-EN-0106.doc

Summary

General notes

Symbols used

Important functional notes

Design and method operation

Functional principle

Explains how the metal detector operates using electromagnetic fields.

Safety

Use to the intended purpose

Guidelines for correct application of the metal detector.

Dangers arising from non-compliance with safety notes

Highlights risks associated with ignoring safety instructions.

Safety notes for the operator

Precautions for personnel operating the equipment.

Safety notes during operating, maintenance and cleaning

Safety measures during routine activities like operation and cleaning.

Safety information for commissioning

Safety advice for the initial setup and installation phase.

Safety information for storage and transport

Notes on residual risks

Consequences of unauthorized modification

Effects of altering the equipment without manufacturer authorization.

Inadmissible operation

Lists operations and conditions that are not permitted.

Commissioning

Mechanical installation

Procedures for physically mounting the detector head.

Connections

How to connect the detector head to the control unit.

Errors and fault rectification

S+S GLS 350/150 GENIUS+ Specifications

General

Aperture width	350 mm
Aperture height	150 mm
Target Identification	Yes
Sensitivity Adjustment	Yes
Audio Output	Yes
Type	Metal Detector
Waterproof	No
Ground Balance	No
Display	Yes