What to do if the Sportneer P110M Treadmill shows E7 error?
The E7 error on your Sportneer Treadmill indicates a safety key signal malfunction, usually because the safety key has fallen off. Make sure to correctly attach the safety key to resolve this issue.
Why is the motor not working on my Sportneer P110M Treadmill?
If your Sportneer Treadmill motor isn't working, first ensure the safety key is correctly attached. Also, make sure the power cord is properly plugged into a working outlet. If these steps don't solve the problem, there may be an issue with the motor's connecting cable, the inverter, or the motor itself, requiring assistance from a professional technician.
How to fix no display on Sportneer P110M console?
If there is no display on the console of your Sportneer Treadmill, ensure the power cord is properly plugged in. Also, check all cable connections. If the issue persists, it might be due to overload protection, which requires a professional technician to reset.
Why is the Sportneer Treadmill belt slipping?
If the running belt on your Sportneer Treadmill is slipping, it's likely that the running belt itself is too loose, or the motor belt is too loose. Try tightening either the running belt or the motor belt to resolve the slipping.
What to do if Sportneer P110M Treadmill running belt is not smooth?
If the running belt on your Sportneer Treadmill isn't smooth, it could be due to a lack of lubrication or the belt being too tight. Try applying lubrication oil to the belt and deck. If that doesn't work, try loosening the running belt slightly.
What does E1 error mean on Sportneer P110M Treadmill?
The E1 error on your Sportneer Treadmill indicates a signal malfunction, likely due to communication defects between the console and the controller, a defective console, or a defective controller. It is suggested to ask a professional technician to connect the cable again or replace the cable, or replace the console, or replace the controller.
What does E2 error mean on Sportneer P110M?
The E2 error on your Sportneer Treadmill indicates a motor connection malfunction. This could be due to a motor wire or motor error or a defective connection wire between the motor and the controller, or a defective controller. It is suggested to ask a professional technician to replace the motor, or to reconnect the wire between motor and controller or to replace the controller.
What does E3 error mean on Sportneer P110M?
The E3 error on your Sportneer Treadmill means there's a speed sensor malfunction. This might be because the sensor is installed improperly, the sensor is defective, the connection wire between the sensor and controller is defective, or the controller itself is defective. It is suggested to ask a professional technician to check and reinstall the sensor, or replace the sensor, or check and reconnect the wires, or replace the controller.
What does E5 error mean on Sportneer P110M?
The E5 error on your Sportneer Treadmill indicates an over-current motor issue, which could be due to a controller malfunction or a motor malfunction. It is suggested to ask a professional technician to replace the controller or replace the motor.
To Next Page
General