What to do if the SportsArt Fitness 6100 motor is bad?
If the drive board motor voltage is OK but the motor still doesn’t operate, this indicates the motor is faulty. Also, check the motor M+, M- terminals for a broken circuit. Inspect the motor wire connections and brushes.
How to troubleshoot drive board issues on a SportsArt Fitness 6100 Treadmill?
Inspect the drive board wire connections. Place multi-meter probes on the drive board M+, M- ends and press the SPEED key; there should be some voltage. If there is no voltage, the drive board is bad or the display board signal, which travels the 16-pin cable, is in question.
Why does my SportsArt Fitness 6100 show ERR3 during high incline?
If the drive board resistance doesn’t take effect, the treadmill belt speeds up, and the display shows ERR3.
General| Brand | SportsArt Fitness |
|---|---|
| Model | 6100 |
| Category | Treadmill |
| Language | English |
To Next Page