How to fix incorrect incline level on SportsArt Fitness Treadmill?
If the incline level is not correct on your SportsArt Fitness Treadmill, it could be due to a malfunctioning incline VR. Inspect the incline VR cable on the drive board. Measure the VR voltage on the drive board (red-green 0% 1.20Vdc 15% 3.57Vdc). If it's not correct, calibrate the incline unit. If the problem persists, replace the VR unit.
Why my SportsArt Fitness Treadmill unit will not start operating?
General| Incline | 0 to 15% |
|---|---|
| Speed | 0.5 to 12 mph (0.8 to 19 kmh) |
| Deck Thickness | 1" |
| Heart Rate Monitoring | Contact and wireless telemetry |
| Power Requirements | 120V, 15A |
Troubleshooting steps for safety key not working or display errors.
Steps for when the unit does not power on or display is off.
Fixes for keys not operating or operating continuously.
Troubleshooting for motor not rotating or ERR1 error.
Diagnosing display speed differing from actual speed.
Resolving ERR7 startup errors related to incline.
Inspect magnet, bridge board connections, and safety key board.
Troubleshooting for no power or display not lighting up.
Fixes for keypad not reacting or keys operating continuously.
Troubleshooting for soft keys not reacting or operating continuously.
Diagnosing issues with display keys not reacting or operating continuously.
To Next Page