SportsArt Fitness T620 User Manual

Topic: Treadmill Walk Belt Lubrication and the Lubrication Prompt
Date: 2009-03-10
Overview: In late 2008, SportsArt added a prompt to remind people to lubricate
treadmill walk belts. This document explains what to do when the lubrication
prompt appears. It also explains walk belt lubrication as part of a treadmill
maintenance program.
Applies to treadmills with the lubrication prompt: T610, T620, T625, T630,
T650, T650M, T670, and T680
Lubrication Prompt
When total distance exceeds 4000 KM/2500 miles and the walk belt stops
moving, the message “SERVICE NEEDED- APPLY LUBE” appears on the
treadmill display.
Until total distance exceeds 4100 KM/2560 miles, the treadmill can be
operated normally. At over 4100 KM/2560 miles, the “SERVICE NEEDED-
APPLY LUBE” message will remain on the screen and the treadmill will not
operate until the following process is completed.
1. On T630, T650, T650M, T670, T680 treadmills, remove one end cap (left).
On T610, T620, T625 treadmills, remove one end cap and one landing strip
(right).
1

SportsArt Fitness T620 Specifications

General

Brand	SportsArt Fitness
Model	T620
Category	Treadmill
Language	English

Summary

Treadmill Walk Belt Lubrication

Lubrication Prompt Overview

Explains the 'SERVICE NEEDED- APPLY LUBE' message, its trigger conditions, and operational impact.

Lubrication Procedure

Step-by-step guide for activating lubrication mode and applying lubricant to the treadmill walk belt.

Manual Lubrication Activation

Instructions on how to manually activate the lubrication mode without a prompt.

Lubrication Policy and Materials

Covers recommended lubrication intervals and details on available lubrication materials.

Periodic Maintenance

Periodic Maintenance Tips

Lists recommended periodic maintenance tasks for treadmills, including lubrication.