SPORTSPOWER WP-505A User Manual

CEDAR RIDGE SWING SET
MODEL # WP-505A
OWNER’S MANUAL
ASSEMBLY, INSTALLATION, CARE, MAINTENANCE AND USE INSTRUCTIONS
FOR RESIDENTIAL USE ONLY
DO NOT RETURN TO THE STORE
DO NOT RETURN TO THE STORE
For customer service, please call 1-866-370-2131 Monday-Friday 9am-5pm Eastern Time
or visit our website at www.sportspowerltd.net
SPORTSPOWER LTD
Level 20, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong
US Toll Free Number 1-800-497-6106
!
WARNING
➢ This product is intended for use by children from ages 3 to 10.
➢ This unit is designed for use by up to 8 children at one time. Maximum weight of each user is 100
lbs.(45kg), with combined weight not to exceed 800 lbs.(360kg)
➢ Assembly requires at least three adults.
➢ Do not allow more than one child to play on the individual swing/slide at a time.
➢ Always inspect product thoroughly before each use.
PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE

SPORTSPOWER WP-505A Specifications

General

Number of Swings	2
Assembly Required	Yes
Material	Steel, Plastic
Color	Blue/Yellow
Recommended Age	3 to 10 years

Summary

Important Warnings and Instructions

Find a Safe Play Location

Play Supervision Guidelines

Inspection and Weather Guidelines

Inspection Before Use

Procedures for checking equipment integrity and safety before each use.

Play Season Maintenance Schedule

Consumer Site and Surfacing Selection

Protective Surfacing Guidelines

Information on selecting and maintaining shock-absorbing ground cover.

Surfacing Options and Placement

Playground Safety Checklist

Supervision and Surfacing Checks

Checklist for child supervision and protective surfacing requirements.

Equipment Maintenance and Safety Checks

Component Inspection Details

Inspecting Hardware and Wooden Parts

Inspecting Functional Components

Ground Cover and Play Area Requirements

Hardware Pre-Assembly

Assembly Tightening Caution

Assembly and Installation Instructions

Step 1: Initial Frame Assembly

Instructions for assembling the initial wood beams to form the base structure.

Step 2: Connecting Frame Components

Connecting additional wood beams to build the swing set frame.

Step 3: Adding Support Beams

Attaching support beams to the assembled frame sections.

Step 4: Erecting Side Panels

Erecting and securing side panels with multiple people.

Step 5: Assembling the Staircase

Step 6: Attaching Staircase and Brackets

Step 7: Installing Playhouse Floor

Step 8: Adding Playhouse Walls and Supports

Step 12: Installing Roof Supports

Step 13: Final Roof Structure Assembly

Step 14: Installing the Playhouse Roof

Step 15: Securing Roof Boards

Step 16: Assembling Support A-Frames

Step 17: Assembling the Swing Support Beam

Detailed instructions for assembling the main swing support beam.

Step 18: Attaching Glider and Swings

Connecting the glider and swings to the support beam.

Step 19: Installing Anchors and Handlebars

Installing safety anchors and handlebars for stability and grip.

Product Warranty