Spot-on SRL500 User Manual (English)

To Next Page

Self-leveling Rotary Laser

Operating Manual

1. Functions

This instrument is equipped with the semiconductor diode with wavelength of 635nm(green:532nm), which the

laser beam has supreme visibility. And the laser module of instrument will rotate freely to form a laser-scanning

surface. Emitting direction of rotary laser-beam illustrated as follows:

Upright-setting Horizontal-setting

When the instrument is set upright, it will emit laser-beam to form a horizontal scanning surface and a plumb

line automatically. When set horizontally, it will form a plumb scanning surface and a vertical line.

Need help?

Do you have a question about the Spot-on SRL500 and is the answer not in the manual?

Spot-on SRL500 Specifications

General

Details the physical components of the self-leveling rotary laser, including the laser module and handle.

Overviews the control panel layout, identifying key buttons and indicators for operation.

Explains the specific functions of each button and indicator on the instrument's control panel.

Provides step-by-step instructions for correctly installing batteries into the instrument.

Guides on how to properly position the instrument for both horizontal and vertical scanning.

Details the sequence of operations including power, leveling, spinning, directional scanning, and slope adjustment.

Explains battery charging, power indicators, and proper battery maintenance for the instrument.

Describes the infrared remote control, its range, and how to use its functions.

Outlines the procedure to verify the horizontal accuracy of the laser beam over a set distance.

Details the method to check the horizontal line accuracy between two points or walls.

Lists the technical specifications of the self-leveling rotary laser, including range, speed, and dimensions.